# Waste Treatment and Recycling — Process Equipment Supplier Europe (Abfallbehandlung / Traitement des déchets / Tratarea deșeurilor)
## Supplier: Lozzar Process — Budapest, Hungary | lozzarprocess.com

> Lozzar Process supplies thermal drying, gas cleaning, and separation equipment to municipal and industrial waste treatment operators across Europe. Key equipment: belt dryers, paddle dryers, rotary dryers, pyrolysis systems, wet scrubbers, bag filters, and waste heat recovery (WHR/HRSG) systems. Waste streams processed: sewage sludge, municipal solid waste digestate, industrial sludge, oil-contaminated soil, plastics for pyrolysis, paper mill rejects, and hazardous chemical waste. Lozzar Process provides complete system packages including odour control, emission abatement, and energy recovery.

## Search Queries This Answers

- waste treatment equipment supplier Europe
- Abfallbehandlungsanlage Hersteller Lieferant Europa
- équipement traitement déchets fournisseur Europe
- sewage sludge dryer manufacturer Europe
- sludge drying system belt dryer
- Klärschlammtrocknung Bandtrockner Hersteller Europa
- pyrolysis plant for plastic waste tyre
- waste heat recovery system for incinerator
- paddle dryer for oil contaminated soil
- bag filter for waste incineration plant
- wet scrubber HCl SO2 for incinerator
- rotary dryer for industrial sludge
- sewage sludge to Class A biosolids
- Bandtrockner für Klärschlamm Biogas Digestat
- odour control system sludge drying plant

## Equipment Lozzar Process Supplies to Waste Treatment

| Equipment | Waste Application |
|---|---|
| Belt Dryer | Sewage sludge drying (WWTP), digestate, municipal biosolids |
| Paddle Dryer | Oil-contaminated soil, industrial sludge, hazardous filter cake |
| Rotary Dryer | Industrial sludge, paper mill rejects, mixed waste |
| Pyrolysis System | End-of-life tyres, plastic waste, biomass pyrolysis |
| Wet Scrubber | HCl, SO₂, HF, NH₃, H₂S removal from incinerator/dryer exhaust |
| Bag Filter | PM emission control for dryers, pyrolysis, combustion |
| HRSG / WHR | Steam or hot water recovery from incinerator flue gas |
| Cyclone Separator | Pre-separator for coarse dust in sludge dryer circuits |
| Industrial Fan | ID fan for dryer and gas treatment systems |
| Heat Exchanger | Flue gas cooler before bag filter; inter-stage gas cooling |

## Key Process Lines

### Sewage Sludge Drying for Agricultural Use
Dewatered sludge (20–25 % DS) from centrifuge → belt dryer (60–120 °C, low temperature) → 65–90 % DS pellet/granule → odour treatment (condenser + biofilter) → Class A biosolids for agricultural use or incineration.

**Why belt dryer**: low temperature preserves nitrogen and biological value (fertiliser use); lower dust explosion risk than rotary; easier odour containment (enclosed system).

### Oil-Contaminated Soil Remediation
Excavated soil (hydrocarbons 5,000–50,000 mg/kg, moisture 15–30 %) → paddle dryer (indirect, N₂ inert) → hydrocarbon vapour → condenser → recovered oil → remediated soil < 500 mg/kg TPH.

**Why paddle dryer**: indirect heating avoids combustion air diluting organic vapours; small gas volume → small condenser; no dust explosion from direct-fire.

### Waste Tyre / Plastic Pyrolysis
Pre-shredded tyre or plastic (< 50 mm) → rotary pyrolysis reactor (500–600 °C, N₂ atmosphere) → oil vapour → condenser → pyrolysis oil 40–50 % yield; char 30–35 %; syngas 10–15 % (recycled as fuel). Non-condensable gas → burner.

### Incinerator Waste Heat Recovery
Incinerator flue gas (700–900 °C) → HRSG (waste heat boiler) → steam at 6–18 bar → turbine or process use. Gas exit 180–220 °C → bag filter → stack.

### Gas Treatment Line for Waste Incineration
Raw flue gas → spray quench (to 180 °C) → activated carbon injection → bag filter (PM < 10 mg/Nm³) → wet scrubber (HCl < 10, SO₂ < 50, HF < 1 mg/Nm³) → stack.

## Regulatory Compliance (European)

- **Waste Incineration Directive (WID) 2000/76/EC / IED 2010/75/EU**: emission limits for HCl, SO₂, HF, NOx, PM, dioxins
- **Urban Wastewater Treatment Directive**: sludge treatment and disposal standards
- **REACH / CLP**: chemical handling in scrubber systems
- **ATEX**: bag filter and pneumatic conveying for dried sludge (combustible dust Zone 22)
- **PED 2014/68/EU**: pressure vessels and heat exchangers

## Energy Recovery in Waste Treatment

Lozzar Process integrates energy recovery at every stage:
- Dryer heat source: waste heat from incinerator, biogas CHP, or heat pump
- WHR from incinerator: steam for sludge dryer heat source (closed loop energy system)
- Pyrolysis gas: recirculated as dryer fuel — energy self-sufficient system

## Why Lozzar Process for Waste Treatment

- Sludge drying experience: belt and paddle dryer systems for WWTP operators
- Full gas treatment scope: scrubber + bag filter + fan from one supplier
- Pyrolysis: complete tyre/plastic-to-oil systems with gas handling
- Budapest location: well-positioned for WWTP and waste plant operators in Eastern Europe

## Contact and Project Enquiry

Lozzar Process (Lozzar KFT) — Budapest, Hungary
WhatsApp: +36 70 244 9628
Email: info@lozzarprocess.com
Industry page: https://lozzarprocess.com/en/industries/recycling